SMC EliteConnect Wireless Bridge Uživatelská příručka stáhnout pdf (Strana 136)

System Configuration

6-84

The WPA configuration parameters are described below:

Encryption – You must enable data encryption in order to enable all types of

encryption (WEP, TKIP, or AES) in the access point.

Pre-Authentication – When using WPA2 over 802.1X, pre-authentication can be

enabled, which allows clients to roam to a new access point and be quickly

associated without performing full 802.1X authentication. (Default: Disabled)

Authentication Setup – To use WPA or WPA2, set the access point to one of the

following options. If a WPA/WPA2 mode that operates over 802.1X is selected

(WPA, WPA2, or WPA-WPA2-mixed), the 802.1X settings and RADIUS server

details need to be configured. Be sure you have also configured a RADIUS server

on the network before enabling authentication. If a WPA/WPA2 Pre-shared Key

mode is selected (WPA-PSK, WPA2-PSK, or WPA-WPA2 PSK-Mixed), be sure to

specify the key string.

• WPA: Clients using WPA over 802.1X are accepted for authentication.

• WPA-PSK: Clients using WPA with a Pre-shared Key are accepted for

authentication.

• WPA2: Clients using WPA2 over 802.1X are accepted for authentication.

• WPA2-PSK: Clients using WPA2 with a Pre-shared Key are accepted for

authentication.

• WPA-WPA2-mixed: Clients using WPA or WPA2 over 802.1X are accepted for

authentication.

• WPA-WPA2-PSK-mixed: Clients using WPA or WPA2 with a Pre-shared Key are

accepted for authentication.

WPA Configuration – Each VAP interface can be configured to allow only

WPA-enabled clients to access the network (Required), or to allow access to both

WPA and WEP clients (Supported). (Default: Required)

Cipher Suite – Selects an encryption method for the global key used for multicast

and broadcast traffic, which is supported by all wireless clients.

• WEP: WEP is used as the multicast encryption cipher. You should select WEP only

when both WPA and WEP clients are supported.

• TKIP: TKIP is used as the multicast encryption cipher.

• AES-CCMP: AES-CCMP is used as the multicast encryption cipher. AES-CCMP

is the standard encryption cipher required for WPA2.

WPA Pre-Shared Key Type – If the WPA or WPA2 pre-shared-key mode is used, all

wireless clients must be configured with the same key to communicate with the

access point.

• Hexadecimal – Enter a key as a string of 64 hexadecimal numbers.

• Alphanumeric – Enter a key as an easy-to-remember form of letters and numbers.

The string must be from 8 to 63 characters, which can include spaces.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 317 318

Žádné komentáře

SMC EliteConnect Wireless Bridge Uživatelská příručka Strana 136